ADJ Lighting
- Featured
The new ADJ ElectraPix Series is a collection of battery-powered and wirelessly controllable LED wash fixtures designed to deliver maximum creativity and versatility. Each model in the range features 20-Watt RGBAL+UV main LEDs, which are complemented by additional RGB LEDs to generate a background glow effect. The series comprises the linear ElectraPix Bar 8 and ElectraPix Bar 16 as well as the complementary ElectraPix Par 7, which all feature robust IP65-rated enclosures and a host of advanced features, including rechargable Lithium-ion batteries, Aria X2 wireless management system and a flexible L Track rigging system.
All three ElectraPix fixtures incorporate the same individually controllable, color-calibrated 20-Watt hex color (red, green, blue, amber, lime + UV) primary LEDs. The inclusion of the lime LED element allows for an enhanced CRI and variable white color temperature control of 2,700K ~ 9,900K. Meanwhile, the UV element provides the ‘black light’ effect which causes white and neon colored décor and clothing to glow when used alone, and can also be combined with the other elements to create vibrant colors like hot pink, deep purple, and electric blue. The primary LEDs are surrounded by 0.2-Watt RGB color mixing LEDs, which are mounted behind opaque plastic and generate a background glow effect. This provides Lighting Designers with enhanced creative potential, while foreground and background color macros aid easy programming.
Each ElectraPix unit features a high-capacity internal Lithium-ion battery, which can be used for cable free operation. The units are also fitted with standard locking power input and output sockets for situations where longer run times are required. In addition, they feature dedicated charging ports which slot directly into a compatible charging base (these can be integrated into a road case to allow convenient in-case charging). The fixtures themselves are extremely rugged and IP65-rated, allowing temporary outdoor use in any weather conditions. They also feature the flexible L Track rigging system, which allows a variety of accessories (including truss clamps) to lock quickly and securely into place in any of the L Track slots located down the sides of the fixtures (are rear of the bars).
As well as standard 5-pin DMX input and thru connections, all ElectraPix fixtures also feature an integrated Aria X2 wireless transceiver. ADJ’s new Aria X2 technology is a wireless management suite which offers a range of useful tools, including stable wireless DMX control, OTA firmware updates, and remote fixture configuration.
Compact yet powerful, the ElectraPix Bar 8 is a 0.5-meter linear fixture. It incorporates eight primary LEDs and 32 background LEDs. With a native beam angle of 17-degrees it generates a concise wash but is also supplied with a 20-degree diffusion filter that slides into a dedicated slot on the front of the unit and locks securely into place. It is also supplied with a removable glare shield as well as a pair of variable-angle mounting brackets which attach via L-Track and can also serve as floor stands.
The ElectraPix Bar 16 offers the same advanced feature set as the ElectraPix Bar 8 but in a larger 1-meter-long format. It features 16 primary LEDs alongside 66 background LEDs. Offering the same versatility as its smaller sibling (including the diffusion filter, glare shield and mounting brackets), this powerful and versatile fixture offers huge potential for a wide variety of stage and event lighting applications.
Both linear models feature a convenient locking mechanism, with tabs on one end and slots of the other, which allows adjacent fixtures to link together to provide seamless LED spacing across multiple units. In addition, the Accu-Stand VFB dedicated floor-standing base plate is available, which slots onto one end of a linear fixture and secures it in place using L Track locks. The floor stand can be used to support up to two ElectraPix Bar 16 fixtures linked end-to-end, or any combination of ElectraPix Bar 8 and ElectraPix Bar 16 fixtures adding up to 32 LEDs in total.
Rounding out the ElectraPix Series, the ElectraPix Par 7 is a complementary LED par fixture. Packed with all the advanced features of the bar models, it boasts seven main LEDs paired with 29 background LEDs, which are packaged in a compact and lightweight fixture. It features an integral hanging bracket / floor stand and offers a concise 17-degree beam angle but is supplied as standard with a gel frame and diffusion filter.
Each model in the series is available individually as well as in road cased packages. The ElectraPix Par 7 Pak features six of the par fixtures housed in a durable road case that has separate charging slots for each fixture as well as additional storage space for cables and accessories. Meanwhile, the ElectraPix Bar 8 Pak and ElectraPix Bar 16 Pak each feature four of the respective linear fixtures housed in a robust road case with dedicated charging slots for each fixture. All three paks are supplied with an ADJ UC-IR24 remote control that allows simple color selection as well as a power cable which plugs into the side of the case for in-case charging.
“Ideal for a wide variety of production and rental applications, the ElectraPix series fixtures are all bright, robust and versatile,” comments ADJ USA’s Director of Sales, Alfred Gonzales. “Each model offers the creative versatility of individually controllable hex color LEDs, which incorporate both lime and UV chips, as well as background RGB glow LEDs. This is combined with the practical versatility of rechargeable batteries, Aria X2 wireless, IP65-rated casings and L Track rigging to provide LED wash fixtures ready for any stage or event.”
The ElectraPix fixtures are available now from ADJ USA and are due to begin shipping from ADJ Europe in mid-to-late September 2024.
The latest addition to Eliminator Lighting’s Stryker Series of affordable moving heads, the Stryker Spot is a potent LED-powered spot fixture that offers a versatile collection of beam-shaping tools. Compact, lightweight, and easily portable, it is perfect for use by mobile entertainers and event companies. With cETLus and CE approvals, it is also ideal for integrators looking for an affordable and reliable fixture for installation in entertainment venues and houses of worship as well as bars, lounges and nightclubs.
A potent 150-Watt cool white LED engine is focused through precision optics and out through a high-quality glass front lens to deliver a bright and crisp output. Smooth, fast and precise movement is provided by 16-bit stepper motors while motorized zoom delivers a beam angle range of 9° - 14° and motorized focus ensures sharp GOBO projections. The fixture features two independent GOBO wheels, one with eight static fixed GOBOs and another with six replaceable rotating GOBOs. An independent color wheel offers a choice of 7 dichroic options (plus open white) and impressive aerial effects can be generated by two rotating prisms (6-facet circular and 5-facet linear).
Despite its extensive feature set and impressive output, the Stryker Spot has compact dimensions of just 16.4” x 11.5” x 7” / 417mm x 292mm x 180mm (L x W x H) and weighs only 19 lbs. / 8.5kg. It can be controlled via DMX – offering a choice of 16 and 18 channel modes – and is compatible with the RDM protocol which allows remote addressing and fixture management. Alternatively, the fixture is supplied preprogrammed with a variety of standalone programs, including a selection of ‘Target Mode’ options which restrict movement to a defined pan / tilt range to ensure the output is always directed towards the dancefloor or audience. Multiple fixtures can be linked in a Primary/Secondary configuration to run these internal programs, allowing for the easy creation of a synchronized lightshow with no need for programming.
“Small but powerful and packed with features, the Stryker Spot is a versatile moving head that delivers huge creative potential,” comments Albert Paredes, Product Manager for Eliminator Lighting. “With a long-life LED light source and excellent build quality, it offers exceptional value for money, especially considering its output and feature set!”
The Eliminator Lighting Stryker Spot is available now from ADJ USA and is due to begin shipping from ADJ Europe from the end of September.
To provide improved support for existing customers and grow the company’s presence in South Africa, ADJ is pleased to announce a new partnership with DWR Distribution. Offering quicker delivery as well as enhanced local technical and sales support for ADJ’s South African customers, DWR is now ADJ’s exclusive distributor in the country for its ‘Select’ range of professional entertainment lighting, LED video and atmospheric effects equipment. A well-established and well-respected company in the local market, DWR Distribution is ideally placed to support existing customers and introduce new integrators and rental companies to the quality, reliability and value offered by the ADJ range.
Established in 2006, DWR Distribution serves an extensive customer base of companies using professional entertainment technology for a wide range of applications. The organization already represents an impressive collection of market-leading AVL brands, to which ADJ is a logical addition. Based out of a 2000sqm facility in Johannesburg, DWR provides technical backup, support, training and a service workshop to serve customers across South Africa. At the heart of the company’s ethos is the slogan ‘it’s all about the people’. This relates both to DWR’s friendly and skillful team and the extensive network of relationships they have built up with customers across the country.
"We are partnering with ADJ to address a market segment that DWR currently isn’t serving," says Duncan Riley, Director at DWR Distribution. "Due to geopolitical and currency fluctuations within our market, there's a growing demand from startups, houses of worship, nightclubs and small-to-medium-sized rental companies seeking gear for their businesses. DWR is typically associated with top-tier brands, however we recognize that many clients have different requirements but still want quality solutions along with support from DWR Distribution. We aim to meet our customers’ needs with this new partnership.”
"I’ve had extensive discussions with Jos Reulen [ADJ Europe’s Export Manager], and we’ve decided to move forward with representing ADJ in South Africa. I’m excited to support new clients by maintaining adequate stock levels and upholding the reliable customer support that DWR is known for," Riley adds. "This new market represents a positive development for DWR, and we thank ADJ for this opportunity to represent the brand in our region."
ADJ serves the mid-market AVL rental, event production and installation sectors of the industry, from headquarters in Los Angeles, California as well as regional facilities in Mexico and The Netherlands. ADJ’s range includes moving head luminaires, static washes, beam effects, audience blinders, strobes, DMX control hardware/software, LED video panels and related accessories, as well as fog, haze, and other atmospheric effect generators. Established in 1985, ADJ has almost 40 years of experience designing and manufacturing entertainment lighting products and has developed a worldwide reputation for quality, reliability and value. The company’s products are used worldwide for events, productions, and festivals of all sizes, and are also installed in a wide variety of venues including nightclubs, concert halls, theaters, houses of worship and theme parks. ADJ Europe distinguishes products at the top of the company’s portfolio – those specifically designed for production/rental and larger installation projects – as the ‘Select’ range.
“ADJ is already well-established in South Africa,” states Sebastian Mobers, ADJ Europe’s Sales Director, “with our fixtures used by numerous rental companies and integrators to service a wide variety of live event and installation projects. However, we are confident that there is much growth potential in the market. Partnering with DWR Distribution, which has an approach to quality customer service that resonates with our own, is a logical next step to realize this growth potential.”
“It has been a pleasure to work with Duncan and his team as we have moved towards formalizing this new partnership,” adds Jos Reulen, Export Manager for ADJ Europe. “I am confident that DWR Distribution is the right company to provide fantastic customer service to existing ADJ customers in South Africa as well as to introduce our Select product catalog to a wide variety of new customers in the country’s vibrant entertainment sector. This new distribution arrangement will also allow us to provide better customer service through onsite product demos, quicker order fulfilment, as well as local technical support and after sales service, for which DWR has a stellar reputation.”
DWR Distribution is ADJ’s exclusive distributor for the Select product range in South Africa with immediate effect. More information about the company can be found at www.dwrdistribution.co.za and sales enquiries from customers in South Africa should be sent directly to sales@dwrdistribution.co.za.
Taking ADJ’s best-selling Jolt Series of multifunctional strobe/wash fixtures to the next level, the new Jolt Panel FXIP and Jolt Bar FXIP feature IP65-rated weatherproof casing designs that allow the fixtures to be used safely outdoors in any weather. Delivering lighting designers the creative potential of dazzlingly bright white strobe/blinder LEDs combined with zone-controllable RGB color mixing LEDs in the same versatile fixture, these new Jolt Series luminaires also offer a variety of other improvements and upgrades over the original models.
Both fixtures feature a central strip of 5-Watt cool white SMD LEDs which are extremely bright and, when combined in multiples on the face of each Jolt fixture, generate truly intense strobe and blinder effects. The white LEDs are surrounded on both sides by arrays of 0.5-Watt RGB color mixing LEDs (increased from 0.3-Watt on the original models). A wide variety of vibrant color options can be achieved using the RGB LEDs through individual dimming control of the independent red, green, and blue elements. Used as single-color sources, the fixtures can be used to generate potent washes that cover a large area. Alternatively, through use of the zone control function, each independent block of LEDs can be controlled separately to allow for the creation of dynamic chases and other animated pattern effects.
The Jolt Bar FXIP features a central strip of 112 x white LEDs, surrounded on both sides by a total of 448 color LEDs. Both types of LED are grouped into independently controllable zones (16 white and 32 color), which means the unit can also be used to generate strobe chases and colored ‘eye candy’ animated pattern effects. Measuring 1m in length (39.4”), the fixture is compact in its other dimensions (4.19” / 106.4mm and 5.42” / 137.5mm) and weighs an easily manageable 20.5lbs. / 9.3kg. It features two variable angle brackets, which can be used to set the unit directly onto the floor of a stage or attach clamps to facilitate truss mounting either vertically or horizontally. This upgraded version is also supplied with Omega Receiver Brackets which can easily replace the angle brackets and allow a pair of Omega clamps to attach directly to the rear of the fixture. Magnets fitted into each end of the fixture aid with creating seamless runs of LEDs across two or more fixtures. Each unit is also supplied with a metal bracket, screwed into the back panel for convenient storage, which can be used to secure neighboring units in place after the magnets are used to achieve perfect alignment.
The Jolt Panel FXIP incorporates 48 x white LEDs, surrounded on both sides by a total of 800 x RGB LEDs, arranged in a panel configuration. Again, both types of LED are grouped into independently controllable zones (6 white and 40 color), allowing for the creation of eye-catching animated chase patterns. With dimensions of 6.06” (153.8mm) x 16.42” (417mm) x 10.38” (263.5mm) [L x W x H], the fixture is big enough to assert its presence within a lighting rig but compact enough to be easily setup and transported. It weighs in at 13.67 lbs. / 6.2kg and is supplied with a variable angle yoke, which locks into place securely using two large plastic handles. This yoke features a reinforced design that represents a significant upgrade from the original model. Alternatively, the yoke can be removed and the unit features mounting points on the back which allow direct connection of an Omega bracket.
Another significant upgrade can be found in the construction of the units. Not only do they offer IP65-ratings, but they have been reengineered with more robust, touring grade enclosures. Built from thick metal with sleek rounded corners, both fixtures are ready to withstand the rigors of the road when transported from show to show in touring carts. They can be used outside in any weather conditions, but even for indoor shows their IP65-rated design offers protection from thrown drinks, confetti, haze residue, and other particulates. This ensures rock solid reliability as well as permitting a reduced maintenance schedule.
Both models are equipped with wireless DMX transceivers – an upgrade over the original versions – which utilize the new Aria X2 technology. This not only provides extremely stable wireless signal distribution by creating a wireless mesh network between all compatible fixtures but also allows remote fixture management that provides full access to the system menu remotely via a smartphone app.
Another useful upgrade is the addition of a dedicated slot in the front of each fixture designed to accommodate a light modifier. Featuring a spring-loaded locking mechanism, this allows filters to be quickly, easily, and securely positioned in front of the LEDs. Both models are supplied with an optional frost filter, which slides into the channel and blurs the LED output to generate a distinctly different effect with less pixelization. In addition, other filters are available as optional extras, including a black option and a curved 3D textured filter, further adding to the creative versatility these fixtures offer to lighting designers.
DMX addressing and mode selection (the Jolt Bar FXIP offers 13 channel options ranging from 6 to 126 and the Jolt Panel FXIP supports 10 options ranging from 6 to 141 channels) is facilitated via a large backlit LCD display on the rear panel of each fixture. These provide access to a menu-driven interface navigated via four push buttons, which also allows configuration of the fixtures’ various operating parameters including selectable dimming modes, dimming curves and LED refresh rates.
IP65-rated locking power input and output sockets are provided on both models, with the later allowing the power supply for multiple fixtures to be daisy chained from a single outlet (6 @ 120V / 12 @ 230V). The fixtures are also equipped with 5-pin input and output sockets for connection of a wired DMX control signal and all four sockets are fitted with rubber caps which provide protection from liquids and dust while not in use.
“The original Jolt Series fixtures have proven to be extremely popular, both in the touring/rental and venue integration markets,” comments ADJ USA’s Director of Sales, Alfred Gonzales. “However, a consistent request from customers was for an IP65-rated version that can be used safely for outdoor stages and events in any weather. The Jolt Bar FXIP and Jolt Panel FXIP satisfy that request while also integrating other significant improvements over the original design. The result are truly versatile LED strobe/wash panel and bar fixtures that provide lighting designers with huge creative freedom both in their deployment and in the variety of effects they can be used to produce. Ideal for outdoor festival stages and EDM events, these new models elevate ADJ’s flagship Jolt Series to the next level.”
A staple of concerts, theatre productions and venue lighting systems for decades, par cans have an indisputably iconic look. ADJ’s original Par Z fixtures took this classic external design and gave it a new lease of life by combining it with potent and highly efficient LED light engines. Now, ADJ has revisited this concept to create updated versions of these best-selling fixtures. The new PAR Z100 3K2, PAR Z100 5K2 and PAR Z150 RGBA, which feature a number of small upgrades and improvements on the original models, are the perfect modern par can for every kind of stage or entertainment lighting application.
These LED-powered fixtures look exactly the same as a regular black par can, but inside their casing is housed a powerful LED light source. Offering output comparable to a 1000W sealed beam par, but producing a fraction of the excess heat, the PAR Z100 3K2, PAR Z100 5K2 and PAR Z150 RGBA are ideal for illuminating stages while ensuring that performers won’t get too hot, reducing power consumption, and removing the need for regular lamp replacements.
The PAR Z100 3K2 features a warm white 100-Watt C.O.B. (Chip On Board) LED source with a color temperature of 3000K, which offers a good approximation to the output of a traditional warm white halogen lamp. The PAR Z100 5K2 is fitted with a cool white C.O.B LED source with a color temperature of 5000K, which makes for a starker and more intense beam. Both models offer a CRI in excess of 90, which ensures that skin tones appear natural when they are used to illuminate performers and colors look realistic when they are used to light stage sets.
These two fixtures each offer an adjustable beam angle of 9, 15, 20, 25 or 30-degrees, which can be easily changed using a manual latch system. This makes them extremely versatile, suitable for both spotlighting and stage washing duties. They are also supplied with gel frames that can be used to mount color and diffusion filters (sold separately), which adds to the flexibility of these unique fixtures.
The PAR Z150 RGBA is a color version, which harnesses the power of a 150-Watt RGBA C.O.B. LED engine to generate an even wash and extremely smooth color mixing with no color shadows. By combining varied amounts of the red, green, blue, and amber primary LED color elements, users can achieve an almost limitless palette of colors including bold vibrant hues and subtle pastel shades. 64 macros are also supplied that allow quick selection of popular colors to allow fast programming. The fixture also offers variable color temperature for white light washes, making it an ideal fixture for stage lighting, covering both key light and color washing duties. The color temperature can be adjusted between 2300K (very warm) and 9900K (extremely cool) with a series of presets providing easy access to popular temperatures. Manual adjustment on this fixture also allows easy selection between five beam angle options – 7, 11.5, 16, 20.5 or 25-degrees – and a gel frame is included which can be used to introduce a diffusion filter (sold separately) to offer further beam angle options.
With a life expectancy rated at 50,000 hours, the C.O.B. LED light sources that power these fixtures should never need to be replaced, no matter how much use they get. This removes the expense of replacement lamps and the worry that one will go part way through an important show. In addition to 0-100% flicker-free dimming, with a choice of four different dimming curves and six dimming modes, these LED-powered par fixtures also offer variable speed strobing between 0.6Hz and 7.5Hz.
Each unit is fitted with 5-pin DMX input and output sockets and a 4-line digital LED display screen, together with four corresponding push buttons. These provide access to an intuitive menu-driven interface which allows convenient DMX addressing and mode selection. The PAR Z100 3K2 and PAR Z100 5K2 models each offer a choice of three DMX control modes (1, 3 or 4-channel), while the PAR Z150 RGBA supports nine DMX modes (4, 5, 6, 7, 8, 9, 10, 11 or 12-channel) – allow for varying levels of control complexity to suit a wide variety of different applications.
Just like a regular par, the Par Z fixtures each feature an adjustable hanging bracket that can be securely locked into place using two plastic thumb-tightening screws. The fixtures also offer locking power input and output connection sockets. And, thanks to their low power draw, multiple units can be daisy-chained together from a single power outlet (up to 25 Par Z100 3K2 fixtures @ 230V).
All three models are the same size and shape as a regular par can, measuring 19.25” x 10.94” x 10.68” / 489mm x 277.7mm x 271.1mm (LxWxH), and have the same robust metal construction. Each fixture weighs in at a very manageable 7.94 lbs. / 3.6kg. This lightweight, yet strong design makes the units ideal for use on touring productions and one-off events as well as for permanent installation in theatres and concert venues.
Black metal barn doors, PAR64-BD, are available as an optional extra, which are compatible with all three of the new Par Z fixtures. They help users to manually shape where the light shines using four leaves that can each be independently positioned. The barn door assembly is attached to the fixture through insertion into the gel frame holder clip.
“The new PAR Z100 3K2, PAR Z100 5K2 and PAR Z150 RGBA allow lighting and stage designers to achieve the look of traditional par cans while enjoying the technological conveniences of modern LED technology,” comments ADJ USA’s Director of Sales, Alfred Gonzales. “With advantages including low power draw, high efficiency, minimal excess heat, no need for dimmer packs, variable beam angle, and a choice between two white light color temperatures or full RGBA color mixing, these next generation fixtures are the ideal professional choice for contemporary par can use.”
ADJ’s Hydro series: IP65-rated moving heads for spectacular lighting in any weather the ADJ Hydro series is a comprehensive range of IP65-rated automated luminaires that includes all the major fixture types, most with a choice of size options. Every model boasts rugged touring grade construction and a weatherproof design that means they can be safely used for temporary outdoor events even when there is risk of rain, snow or strong winds. Each Hydro series luminaire has been carefully curated to offer the features lighting designers require while remaining lightweight and compact for their respective class of fixture. Designed to last, with premium components throughout, the Hydro series fixtures also offer incredibly good value for money, providing excellent ROI for rental houses and making good quality IP65-rated moving heads affordable for the first time to smaller production houses.
“When the first Hydro Series fixtures were introduced back in 2018,” comments ADJ USA’s Director of Sales, Alfred Gonzales, “they were indisputably game-changing. They brought weatherproof moving heads within the reach of a huge number of production companies and rental houses working on projects with budgets that up until that point would not have allowed for IP-rated fixtures. Since then, the Hydro Series has expanded to include every fixture type and has been thoroughly road tested on festivals and events worldwide. From the rainy fields of England to the dusty deserts of California, and from the humid beaches of Tahiti to the freezing winter snow of Lake Placid, Hydro Series fixtures have consistently allowed lighting professionals to successfully deliver outdoor events in the most challenging of weather conditions. However, the fixtures aren’t designed solely to be used outdoors. For indoor shows their sealed-shells protect the units from dirt, dust, drinks and haze residue to prevent build-up on internal components and therefore offer a prolonged operational life and reduced maintenance requirement.”
Serving interchangeably as a beam, spot or wash luminaire, the Hydro Hybrid is the latest addition to the series. This powerful and feature-packed fixture harnesses the full potential of a potent Osram SIRIUS HRI 420W discharge lamp, focused through precision optics, to deliver an output of up to 14,416 Lumens. It’s expansive feature set includes CMY color mixing and an additional 12-position color wheel, two GOBO wheels (one with 14 fixed static patterns and one with 9 slots for replaceable indexed-rotating GOBOs), two rotating prisms on separate planes (8-facet circular and 6-facet linear), motorized focus, motorized zoom (1.6° - 17.7°: Spot Mode; 3.1° - 39.2°: Beam Mode) and a Frost Filter. Supplied with a variety of pre-programmed macros – for color, GOBO and prism selection – the Hydro Hybrid is designed from the ground-up to make Lighting Designers lives easier and to allow their creative visions to be effectively realized. From piercing aerial beam effects, to crisp surface GOBO projections, and soft-edged washes, this powerful and flexible fixture has every base covered.
The flagship of the Series is the Hydro Profile, a lighting powerhouse which combines a potent 660-Watt cool white LED light engine, precision-engineered optics, and an expansive feature set to deliver crisp projections with a massive output of 26,000 Lumens. Heading up the fixture’s collection of beam-shaping tools is a 4-blade framing system. Each shutter is controlled using two independent motors, one for each side, which allows the individual blades to be applied at any desired angle. In addition, rotation of the combined shutter assembly means the shape created using the four shutters can be precisely positioned. Further manipulation of the output is provided by motorized zoom (6 ~ 45-degrees), iris and focus, as well as two frost filters options. An almost unlimited variety of aerial effects and surface pattern projections can be created using the Hydro Profile. It features two independent GOBO wheels, one with 7 indexed, rotatable patterns and the other with 8 fixed patterns, all of which are replaceable. It also incorporates two indexed, rotatable prisms – 4-facet circular and 6-facet linear – as well as an animation wheel. Any desired color can also be selected thanks to a CMY color mixing system with additional CTO flag. The fixture also offers a separate 7-position color wheel which is loaded with a selection of useful (replaceable) dichroics, including CTB and High CRI filters.
A dedicated beam fixture, the Hydro Beam X12 is a nimble luminaire that has an intense, razor-sharp output. It combines the punchy Philips® Platinum 12R LL MSD 6000-hour discharge lamp with a carefully curated selection of beam-shaping tools. The fixture delivers a huge output of up to 522,000 lux (measured at a 10m distance) and is capable of firing its beam across a vast distance, creating impressive aerial effects shooting right up into the night sky. For a luminaire offering such a powerful output, rich feature-set and IP65-rating, the Hydro Beam X12 is remarkably lightweight at just 48 lbs. (21.8 kg.). This allows for extremely quick pan and tilt movement, which empowers lighting designers to create impressive fast-paced aerial effects. A 16-position (plus open) stamped metal GOBO wheel features a collection of break-apart patterns and simple shapes, including four beam reducers. These can be kept sharp using motorized focus and have been carefully chosen to allow the creation of engaging beam effects. The fixture also features a separate color wheel, offering 14 options, including CTB (6000K), CTO (3200K) and UV. A choice of two prisms completes the unit’s collection of beam-shaping tools. Both the 6-facet linear and 24-facet circular prism offer bidirectional rotation, while the two prisms can also be overlaid, with different rotation speed and direction, to create complex diffracted beam patterns.
Offering an impressive 15,000 Lumen output derived from a potent 320-Watt cool white LED engine, the Hydro Spot 2 is a feature-packed spot fixture. From animation wheel, twin GOBO wheels and two rotatable prism options (6-facet circular and 5-facet linear), to CMY color mixing with variable CTO flag and an additional 7-position color wheel (including 5600K CTB and High CRI filters), it offers all the tools a lighting designer could wish for. One of the GOBO wheels allows indexed rotation, while the other is static, and the rotating patterns are also replaceable. Motorized zoom allows for a beam angle variable between a tight 8-degrees and wide 41-degrees, while motorized focus can be used to ensure sharp pattern projections and aerial beam effects or to deliberately blur GOBOs to create more ambient effects. In addition, two variable frost filter options – medium and heavy – can be used to further blur projected images or to generate a soft-edged wash output.
The Hydro Wash X19 is powerful and versatile zooming wash fixture. It incorporates 19 x Osram 40-Watt RGBW 4-in-1 LEDs, making for an impressive total of 760-Watts. The LEDs offer smooth color mixing, allowing for the creation of a wide variety of different hues, and are arranged in three concentric circles. Each LED is individually controllable, meaning pixel-mapped effects can be generated, with support available for both the KlingNet and Artnet control protocols as well as standard DMX-512. Linear motorized focus allows the beam angle to vary between a narrow 6-degrees and wide 40-degrees. This allows the fixture to be used to create tight mid-air beam effects as well as to bathe large areas with vibrant color washes at different moments during the same show.
For applications that call for compact fixtures, the Hydro Spot 1 is a small, LED-powered spot. Harnessing the power of a potent 200-Watt cool white LED light engine, the luminaire delivers punchy output with even coverage. Its extensive feature set provides lighting designers with a wealth of creative potential. This starts with motorized zoom, allowing for a variable beam angle of 11° ~ 22°, which is paired with motorized focus to ensure pattern projections remain sharp regardless of distance. The fixture features two independent color wheels, each loaded with 8 dichroics, including CTO, CTB and UV filters. It also offers a separate GOBO wheel, which has 6 slots for replaceable, rotating glass or aluminum GOBO patterns. Two rotating prisms (5-facet linear & 6-facet circular) allow for the creation of stunning aerial effects, while two frost filters (light and heavy) allow for blurring the edges of GOBO patterns and creating a wash output, respectively.
Equally compact, the Hydro Wash X7 is a wash fixture which harnesses the power of seven 40W Osram 4-in-1 (RGBW) LEDs. Each LED can be controlled independently, which allows for the creation of dazzling ‘eye candy’ visuals through full pixel-mapping. The unit also offers motorized zoom with a wide range of between 6 and 40-degrees. This makes the fixture equally suited to generating large washes of punchy saturated colors as it is to creating narrow solid beams ideal for impactful aerial effects.
Rounding out the series’ collection of compact fixture options, the Hydro Beam X1 is a small moving head that packs a mighty punch. This dedicated beam luminaire is powered by an Osram Sirius HRI 100W discharge lamp that offers an impressively long operating life of 6,000 hours. Combined with precision optics and a tight 3-degree beam angle, this allows the fixture to generate a powerful beam that travels over a long distance and is capable of creating a wide variety of stunning midair effects. Despite its small size, the X1 packs in plenty of beam-shaping features. Its color wheel offers a diverse selection of 14 color options, including UV and a CTB color correction filter, plus open white. A second wheel is loaded with a varied selection of 15 GOBO patterns plus open, which include 4 beam reducers and the versatile fixture also features a 16-facet bi-directional rotating circular prism as well as an independent frost filter.
In addition to the comprehensive collection of automated luminaires, the ADJ Hydro Series also features a dedicated mobile service tool known as the Hydro Tester IP. Designed to assess the integrity of compatible IP-rated lighting fixtures, including the complete Hydro Series of moving heads, this compact device is a versatile and intuitive service tool. It is intended for use by competent technicians at production companies, dealers and rental houses who want to open and reseal the cases of IP-rated fixtures to carry out tasks such as lamp or GOBO replacement and regular maintenance. The easily portable unit is built into a rugged carry case, complete with a storage compartment for the supplied power lead and air hose. It can be used to test the integrity of an IP-rated fixture by performing both pressure and vacuum tests. This procedure is essential after a sealed fixture’s case has opened before it is again subject to wet, humid or dusty conditions. A convenient color LCD display, with six accompanying navigation buttons, provides access to a menu-driven interface for operating the tester, which is both intuitive and comprehensive. Manual tests can be easily setup, however, the unit is supplied preloaded with presets for ADJ’s entire IP-rated fixture catalog, which when selected will automatically set the correct parameters for the chosen fixture type.
