B.E.G. has expanded its popular PD4-GH and PD4N series of occupancy and multi-sensors with four Bluetooth-controlled Casambi models: PD4-CAS-GH DALI-2, PD4-CAS-GH, PD4N-CAS DALI-2 and PD4N-CAS can be quickly and easily operated wirelessly via the Casambi app. All those who want to illuminate high or large rooms in an energy-efficient manner are thus provided with highly flexible solutions that ensure any room utilisation in the future.
The built-in Casambi modules of the B.E.G. PD4N-CAS and PD4N-CAS DALI-2 occupancy detectors enable wireless control via the Casambi app. After the Casambi-enabled PD4 models for halls and rooms with high ceilings were enthusiastically received a year earlier, B.E.G. is expanding its wireless product range with the finnish partner.
The PD4N-CAS DALI-2 model has an integrated DALI-2 power supply to which DALI control gear can be directly connected. The individual devices, which are also visible as luminaires in the app, can be logically networked with each other. The PD4N-CAS model does not have a DALI-2 voltage supply, but otherwise has the same sensor functions. It can also be wirelessly linked to all units after connection to mains voltage. The adaptability of PIR sensor sensitivity, reflection factor and the weighting of the two light sensors enables the optimum setting for every application.
By using sensors for lighting control, high energy savings can be achieved, especially in high-bay warehouses. Instead of illuminating entire halls, light is only switched on where it is needed. Connected via a 230-volt power supply, the two Bluetooth-controlled models PD4-CAS-GH DALI-2 and PD4-CAS-GH offer an intelligent, wireless extension to existing DALI-controlled lighting systems via Casambi or even completely new wireless Casambi complete solutions.
The PD4-CAS-GH DALI-2 model has an integrated DALI-2 power supply to which DALI control gear can be directly connected. The individual devices, which are also visible as luminaires in the app, can be logically networked with each other. There is no need for a physical connection via the DALI bus. The PD4-CAS-GH model does not have a DALI-2 voltage supply, but otherwise has the same functions. It can also be wirelessly linked to all units after connection to mains voltage. This opens up completely new freedom for lighting control in high-bay warehouses.
